Pearce Barry
095a110e65
Only one behavior change in the scan loop of zstumbler.rb to, when doing a scan across all the channels, keep it from retrying channel 11 again one last time just before it exits.
39 lines
1.2 KiB
Markdown
39 lines
1.2 KiB
Markdown
Actively scans the Zigbee channels by sending a beacon broadcast packet and listening for responses.
|
|
|
|
## Options
|
|
|
|
**DEVICE**
|
|
|
|
ZigBee Device ID. Defaults to the target device that is specified via the target command or if
|
|
one device is presented when running 'supported_devices' it will use that device.
|
|
|
|
**CHANNEL**
|
|
|
|
The channel to scan. Setting this options will prevent the stumbler from changing channels. Range is 11-26, inclusive. Default: not set
|
|
n
|
|
**LOOP**
|
|
|
|
How many times to loop over the channels. Specifying a -1 will loop forever. Default: 1
|
|
|
|
**DELAY**
|
|
|
|
The delay in seconds to listen to each channel. Default: 2
|
|
|
|
## Scenarios
|
|
|
|
Scanning channel 11 for other ZigBee devices in the area.
|
|
|
|
```
|
|
hwbridge > run post/hardware/zigbee/zstumbler channel=11
|
|
|
|
[*] Scanning Channel 11
|
|
[*] New Network: PANID: 0x4724 SOURCE: 0x25D5
|
|
[*] Ext PANID: 6E:03:C7:74:31:E2:74:AA Stack Profile: ZigBee Enterprise
|
|
[*] Stack Version: ZigBee 2006/2007
|
|
[*] Channel: 11
|
|
[*] New Network: PANID: 0x4724 SOURCE: 0x7DD1
|
|
[*] Ext PANID: 6E:03:C7:74:31:E2:74:AA Stack Profile: ZigBee Enterprise
|
|
[*] Stack Version: ZigBee 2006/2007
|
|
[*] Channel: 11
|
|
```
|